u.s. cage code 06324 www.glenair.com e-mail: sales@glenair.com 20 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. vg95234 connectors ?a d1 d2 e l4 l1 l2 l3 vg95234 a front panel wall mount receptacle alternate insert positions n - x - y basic part number contact arrangement p - pin contacts s - socket contacts a - front panel mount receptacle 1 - standard awg contacts (omit for metric) vg95234 a 32-6 s 1 n application notes 1. front panel mount square ange receptacle?no accessory threads. through mounting holes. 2. standard crimp contact material consists of copper alloy with silver plating. please see pages 16-17 for additional contact information. 3. insert arrangements iaw vg95234. please see pages 10-15. 4. standard insert is synthetic rubber, oil and low temperature resistant (-55c to +125c) iaw mil-r-3065. 5. stainless steel and marine bronze shells are available in series its products. please consult factory. 6. all dimensions are metric unless otherwise noted.
u.s. cage code 06324 www.glenair.com e-mail: sales@glenair.com 21 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. vg95234 connectors vg95234 a front panel wall mount receptacle dimensions shell size ?a +0 -0.15 d1 max d2 h13 e 0.1 l1 0.3 l2 +0.4 -0 l3 0.2 l4 0.3 weight gr. max 10 sl 18.2 16.2 3.2 18.2 24.7 14.2 2.8 25.4 12 14 s 24.6 19.2 3.2 23.0 24.7 14.2 3.2 30.0 17 16 s 27.4 22.4 3.2 24.6 24.7 14.2 3.2 32.5 19 16 27.4 22.4 3.2 24.6 33.8 19.0 3.2 32.5 22 18 30.8 25.6 3.2 27.0 33.8 19.0 4.0 35.0 28 20 34.2 29.0 3.2 29.4 33.8 19.0 4.0 38.0 33 22 37.4 32.2 3.2 31.8 33.8 19.0 4.0 41.0 38 24 40.9 35.3 3.7 35.9 33.8 20.6 4.0 44.5 46 28 46.7 41.4 3.7 39.7 33.8 20.6 4.0 50.8 52 32 53.4 47.8 4.3 44.5 33.8 22.2 4.0 57.0 64 36 59.6 54.1 4.3 49.2 33.8 22.2 4.0 63.5 80 materials shells inserts (temperature range) aluminum alloy iaw qq-a-591 shells high insulation synthetic rubber -55c/+125c crimp contacts copper alloy with silver plating over nickel standard finish (for qq-a-591 aluminum shells) requirements cadmium with olive drab passivation iaw qq-p-416 thermal shock -55c + 125c salt spray after thermal shock 500 hour electrical conductivity very good abrasion resistance very good
|